MDF CO2 Laser Cutter
CO2 laser machine can produce high energy, it can melt most of the material in short time, so make the cutting possible for almost all material all the time.
1. Honeycomb + blades(Knives) + Drawer Worktable
A. Honeycomb table be widely used for soft materials cut job/engrave job.
B. Blades(Knives) table be widely used for cut job.
C. Drawer mainly for waste/small cut pieces collecting.
2. DSP control system.
Leetro 6525A/6565, RD6442G,RD320A or others can be selected. Machine software support coreldraw, AutoCAD output directly.
3. Electric Cabinet(Motor Driver, power supply,Mother Board...)
4. Laser Power Supply.
5. CO2 Glass Laser Tube (RECI W seris /EFR ZS series) ,8000-10,000 hours lifespan.
6. Laser Head With Auto Focus Device or Adjustable Tools.
7. Mechanical parts(X Y AXIS HIWIN rail).
8. Water cooling system.
Metals with plating can NOT be engraved or cut.
*CO2 lasers will mark bare metals when coated with a metal marking solution. Our CO2 laser systems are mainly designed to engrave and cut non-metallic materials, they can also be used to mark on metal with the aid of metal-marking compound.
Standard Laser power:
Optional Laser power:
CO2 glass laser tube
Acrylic 0-20mm, others material(varied according to the nature)
Engraving speed :
Resetting positioning accuracy:
Maximum forming character:
Figure/English: 1x 1mm
220V±10% 50HZ or 110V±10% 60HZ
ArtCut, PhotoShop (Conversion output)
Main Graphic format supported:
PLT/DXF/BMP/AI (Direct output)
Engraver for Curve surfaces:
Rotary clamp is optional and used to engrave on curse surfaces
Maximum Height of Materials to Engrave:
270mm/10.63in.(Up and down adjustable by motor)
Laser tube(life hours):
3000-4000 hours/ reci 8000-10000 hours
Dual red dot pointer
Flat aluminum-alloy table slat worktable
Spare Parts Recommend (R): Laser Tube, Lens, Mirror
Options: Motorized up-down table, Rotary clamp, Water chiller, Auto focus, Honeycomb worktable
Q: Can you laser cut acrylic?
A: The acrylic is then forced through rollers to give an even width and finish. ... However, good quality extruded acrylic (such as Perspex) gives a very clean, smooth edge when laser cut. Extruded acrylic is factory made in sheets, so it tends to be cheap.
Q: Can you engrave acrylic?
A: Laser engraving acrylic is usually problem-free but you might, on occasion, run into some problems. A common complaint from people who laser engrave large fill areas is the appearance of horizontal “raster” lines that make the engraved areas appear coarse.
Q: Can you wash etched glass?
A: Items etched with Armour Etch, Sand Etch or Etch Bath can be washed in your dishwasher just like any other piece of glass. When a glass is Engraved (scratching into the surface of the glass) or deeply carved with a professional sand blaster, you will have to hand wash these items.
Q: What files do laser cutters use?
A: Accepted file types for laser cutting
DXF compatible with AutoCAD version 2011 or earlier.
DWG compatible with AutoCAD version 2011 or earlier.
AI (Adobe Illustrator)
EPS (Adobe Illustrator)
The file can contain any type of curve or line.