100W-130W CO2 Laser Power Supply DY13
Laser Power Supply DY13 for for W4 / S4 / Z4 CO2 Sealed Laser Tube
1. This power supply is specially designed for RECI W4/S4/Z4 (100-130W) Special laser tube. The power supply makes laser tube output larger and more stable.
2. Quick response speed and effect, high performance, large cutting power, it also can prolong laser tube service life.
3. Easy control: the start and stop of laser can be easily controlled by TTL level.
4. The power supply has output open circuit protection.
5. The power supply has TTL signal indication, water through signal indication and laser output indication.
6. This power supply has the Button to test output laser manually.
7. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber etc.
AC110V 220V (The order should be especially instructions)
47 - 440Hz
Max Input Power
Max Input current
Max output Voltage
Max Output current
equal or more than 90% (load down)
equal or more than10000h
equal or less than 1mS (the time from output of switch signal to 90% of initial setting current)
Voltage - resisting
Input - Output, input - machine hull: C1500V 10mA 60s; output cathode and machine hull connection
Work temperature (-10 ~ 40), Relative humidity: Equal or less than 90%
The compulsive air cooling