Brass Fiber Laser Marking Machine
High speed, 2-3 times over than traditional diode pumped marking machine
High peak power and excellent beam quality.
Good touch interface and powerful control system.
Advanced digital high speed scanning galvanometer, small volume, quick speed, good stability.
Modular design, separate laser generator and lifter, more flexible, can marker on bigger area and complicated surface.
Be able to mark on aluminum, copper, gold and silver without the shadow and virtual open phenomenon.
Adopt special flying marking control system, with good performance and easy operation.
Laser Type: Fiber Lasers Wavelength:1064nm
Laser Pulse Frequency: 20-80Khz
Beam Quality: <1.4M2
Peak Laser Power: 30W
Engraving Speed: <9000MM/S
Engraving area: <110x110mm or 200x200mm
Engraving Depth: less than or equal to 0.3MM
Repetition Precision: ±0.01MM Min.
Line Width: 0.02MM Min.
Cooling Mode: Air Cooling Graphic
Formats Supported: PLT. DST. AI. DXF. BMP.JPG.CAD. CDR. DWG
Power Source: AC 110V±10%, 50/60Hz
Working Temperature: 10-35 C
Working Humidity: below 75%(No condensation)
Working Environment: Clean;free of dust
Gross Power: below1000W
Safety Protection Class: IP54
Laser Generator Safety Class: IV
Adjustable Height Direction (Upper surface): 550-1200MM
Adjustable Height Direction (Side): 400-1500MM
Front And Back Direction Adjustable Distance: 0-200MM Marking
Angles: Any Angles
Laser Module Life: >100000 hours
Warranty: One year
Mobile phone keypad, plastic translucent keys, electronic components, integrated circuits (IC), electrical appliances, communication products, sanitary ware, tools, accessories, knives, eyeglasses and clocks, jewelry, auto parts, luggage buckle, cooking utensils, stainless steel products and other industries.
Question: Can it engrave 1mm deep on metals? Aluminum,
Answer: for engraving aluminium 1mm,yes,but not by one pass .And the smaller marking area,faster for deep engraving, for example 70x70mm.Certainly if you want to mark bigger area and not deep,you can buy optional lenses for 110x110mm or 150x150mm which you prefer.
Question: Will this machine work on Firearm Serial Number engraving?
Answer: Sure it's engraving on metal for serial number
Question: The ezcad is telling me that the dongle is not detected... i'm not finding a dongle. does anyone know if it actually has one and it was not included?
Answer: The dongle is not necessary. If you have questions pls contact us by email thanks
Question: Does this unit come with everything ready to plug it in and start engraving?
Answer: Yes everything included. You just plug and start to work thanks