Tel: +86-531-50962831

E-mail: info@haoyuelaser.com

Home > News > Content
Fiber Marking Machine Daily Maintenance
- Aug 16, 2018 -

Maintenance is the only way to maintain, improve performance, accuracy, save money, and increase efficiency for your business. The following is a summary of the maintenance methods for a series of fiber marking machines.

 

fiber lens 200galvo head

moving tableRaycus 20w


1) When the unit is not working, turn off the marking machine and computer power.

 

2) When the unit is not working, cover the field lens to prevent dust from contaminating the optical lens.

 

3) When the machine is working, the circuit is in a high voltage state. If it is not a professional, do not overhaul it during startup to avoid electric shock.

 

4) If there is any malfunction of the unit, the power should be turned off immediately.

 

5) When the equipment is used for a long time, the dust in the air will be adsorbed on the lower surface of the focusing mirror. The lighter will reduce the power of the laser and affect the marking effect. If the optical lens absorbs heat too much, it will burst. When the marking effect is not good, you should carefully check the surface of the focusing mirror for contamination.

 

If the surface of the focusing mirror is contaminated, the focusing mirror should be removed to clean the lower surface.

Care should be taken when removing the focusing mirror, taking care not to break or fall; at the same time, do not touch the focusing mirror with your hands or other objects.

The cleaning method is to mix absolute ethanol (analytical grade) with diethyl ether (analytical grade) in a ratio of 3:1, infiltrate the mixture with a long fiber cotton swab or lens paper, and gently scrub the lower surface of the focusing mirror. A cotton swab or lens paper must be replaced.

 

6) During the working of the marking machine, the marking machine must not be moved to avoid damage to the machine.

 

7) Do not cover the stack or put other items on the marking machine to avoid affecting the heat dissipation effect of the machine.

 

8) Always clean the dust, keep the machine dry and clean, clear the dust from the inside to the outside, pay attention to the laser and electricity

Dust in the brain outlet, do not clear the laser and the computer case.

 

9) The working environment of the machine must be kept dry and ventilated.