Tel: +86-531-50962831

E-mail: info@haoyuelaser.com

Home > News > Content
The Problem Of Laser Tube Exploded
- Jul 02, 2018 -

The problem of laser tube exploded can be divided into the problem of fire in the tube and the problem of fire outside the tube.


EFR laser tube

reci laser tube

The problem of sparking in the tube includes the problem that the water in the laser tube is not full and there is a bubble. The solution is to erect the laser tube in the direction of water inflow in the case of water passing, so that the bubble flows out; the lead of the laser tube is poorly connected. The solution is to re-weld the laser tube motor line; the power-on sequence is not correct. The solution is to turn on the power in order, first turn on the power, wait for the machine to be reset, turn on the laser power; laser tube quality problem, the solution is to replace the laser tube .

 

The problem of fire outside the tube is that the high-pressure joint is loose and the contact is poor. The solution is to ensure that the joint is well connected; the ambient air is humid, and the water at the high-pressure joint is too large. The solution is to ensure the air is dry at the high-pressure joint, and the high-pressure joint is on the seat. Waterless; high voltage line leakage, damage, the solution is to replace the high voltage line; too close to the metal part of the machine, the solution is to adjust the position of the laser tube or cover the silicone sleeve at the high pressure end; internal disconnection or destruction of the high voltage connection device, the solution Is to repair or replace the laser power supply; laser tube problem, the solution is to replace the laser tube.